YWZ4 (YT1) series electric hydraulic drum brake

Application:The YWZ4 (YT1) series electric hydraulic drum brake is widely used for deceleration and parking (maintenance) braking of various mechanisms in lifting and transportation, belt transportation, port loading and unloading, metallurgy, and construction machinery with explosion-proof requirements.YWZ4 (Ed) series electric hydraulic drum brakes are widely used for deceleration and parking (maintenance) braking of various mechanisms in lifting and transportation, belt transportation, port loading and unloading, metallurgy, and construction machinery with explosion-proof requirements.Compliance with standards:The connection dimensions and braking torque parameters of the YWZ (YT1) series electric hydraulic drum brake comply with the JB/ZQ4388-86 standard, and the technical requirements comply with the JB/T6406-2006 standard.The connection dimensions and braking torque parameters of the YWZ4 (Ed) series electric hydraulic drum brake comply with the JB/ZQ4388-86 standard, and the technical requirements comply with the JB/T6406-2006 standard.Main features:▲ The production is equipped with riveted brake pads, and if replacement of the card type is required, it should be noted;The main swing hinge points are equipped with self-lubricating bearings, which have high transmission efficiency, long service life, and do not require lubrication during use;▲ Adopting YT1 series electric hydraulic thruster thruster;▲ Normally closed design, (power-off) spring brake, (powered on) thruster release.Working conditions:◆ Altitude:<2000m;◆ Environmental temperature: -20 ° C to+40 ° C;Relative humidity: ≤ 90%;Work schedule: intermittent (S3-60%) and continuous (S1);Power supply voltage: three-phase AC, AC380 50Hz (other power levels can be customized as needed);When there are special requirements, they should be negotiated and determined during the ordering process.Basic parameters:● Product model: YWZ4-100、YWZ4-150、YWZ4-200、YWZ4-300、YWZ4-400、YWZ4-500、YWZ4-600、YWZ4-700、YWZ4-800Applicable wheel diameter: 100-800mmBraking torque: 40-12500Nm

YWZ10, YWZ12 series electric hydraulic drum brakes

Application:The YWZ10 and YWZ12 series electric hydraulic drum brakes are widely used for deceleration and parking (maintenance) braking of various mechanisms in lifting and transportation, belt transportation, port loading and unloading, metallurgy, and construction machinery with explosion-proof requirements.Compliance with standards:The connection dimensions and braking torque parameters of the YWZ10 and YWZ12 series electric hydraulic drum brakes comply with the GB6333-86 standard, and the technical requirements comply with the JB/T6406-2006 standard. They are matched with Ed series thrusters that comply with the DIN15430 standard.Main features:▲ Interlocking type equal clearance device and automatic tile positioning device can always maintain equal clearance of both sides of the tile without adjustment, completely avoiding the phenomenon of one side of the brake pad floating against the brake wheel due to uneven clearance;The main swing hinge points are equipped with self-lubricating bearings, which have high transmission efficiency, long service life, and do not require lubrication during use;The brake spring is arranged inside the square tube and equipped with a ruler, allowing users to easily read the braking torque value, eliminating the hassle of measurement and calculation;▲ The brake pad is a card type integral molding structure, which is very convenient and fast to replace. It is equipped with brake pads of different materials such as semi metal (asbestos free) hard and semi hard, soft (asbestos free), etc. for users to choose from;▲ Equipped with Ed series electric hydraulic thruster products, with sensitive action and long service life;▲ Normally closed design, (power-off) spring brake, (powered on) thruster release.▲ Front mounted manual, easier to use and maintain.Working conditions:◆ Altitude:<2000m;◆ Environmental temperature: -20 ° C to+40 ° C;Relative humidity: ≤ 90%;Work schedule: intermittent (S3-60%) and continuous (S1);Power supply voltage: three-phase AC, AC380 50Hz (other power levels can be customized as needed);When there are special requirements, they should be negotiated and determined during the ordering process.Basic parameters:● Product model: YWZ10-200、YWZ10-250、YWZ10-315、YWZ10-400、YWZ10-500、YWZ10-630、YWZ10-710、YWZ10-800Applicable wheel diameter: 200-800mmBraking torque: 80-12500Nm● Product model: YWZ12-200、YWZ12-250、YWZ12-315、YWZ12-400、YWZ12-500、YWZ12-630、YWZ12-710、YWZ12-800Applicable wheel diameter: 200-800mmBraking torque: 80-12500Nm

YWZ8, YWP series electric hydraulic drum brake

Application:YWZ8, YWP series electric hydraulic drum brakes are widely used for deceleration and parking (maintenance) braking of various mechanisms in lifting and transportation, belt transportation, port loading and unloading, metallurgy, and construction machinery with explosion-proof requirements.Compliance with standards:The connection dimensions and braking torque parameters of YWZ8.YWP series electric hydraulic drum brakes comply with JB/ZQ4388-86 and GB6333-86 (with A series) standards, and the technical requirements comply with JB/T6406-2006 standards. They are matched with Ed series thrusters that comply with DIN15430 standards.Main features:▲ Interlocking type equal clearance device and automatic tile positioning device can always maintain equal clearance of both sides of the tile without adjustment, completely avoiding the phenomenon of one side of the brake pad floating against the brake wheel due to uneven clearance;The main swing hinge points are equipped with self-lubricating bearings, which have high transmission efficiency, long service life, and do not require lubrication during use;The brake spring is arranged inside the square tube and equipped with a ruler, allowing users to easily read the braking torque value, eliminating the hassle of measurement and calculation;▲ The brake pad is a (with card slot) card mounted integral molding structure, which is very convenient and fast to replace. It is equipped with brake pads of different materials such as semi metal (asbestos free) hard and semi hard, soft (asbestos free), etc. for users to choose from;▲ Equipped with Ed series electric hydraulic thruster products, with sensitive action and long service life;▲ Normally closed design, (power-off) spring brake, (powered on) thruster release.Working conditions:◆ Altitude:<2000m;◆ Environmental temperature: -20 ° C to+40 ° C;Relative humidity: ≤ 90%;Work schedule: intermittent (S3-60%) and continuous (S1);Power supply voltage: three-phase AC, AC380 50Hz (other power levels can be customized as needed);When there are special requirements, they should be negotiated and determined during the ordering process.Basic parameters:● Product model: YWZ8-200、YWZ8-250、YWZ8-300、YWZ8-315、YWZ8-400、YWZ8-500、YWZ8-600、YWZ8-630、YWZ8-700、YWZ8-710、YWZ8-800Applicable wheel diameter: 200-800mmBraking torque: 135-10000NmBasic Parameters:Product models: YWP-200, YWP-250, YWP-315, YWP-400, YWP-500, YWP-630, YWP-710, YWP-800Applicable wheel diameter: 200-800mmBraking torque: 80-12500Nm

YWZ5, YWZ9 series electric hydraulic drum brakes

Application:YWZ5  The YWZ9 series electric hydraulic drum brake is widely used for deceleration and parking (maintenance) braking of various mechanisms in lifting and transportation, belt transportation, port loading and unloading, metallurgy, and construction machinery with explosion-proof requirements.Compliance with standards:The connection dimensions and braking torque parameters of the YWZ5 series electric hydraulic drum brake comply with the GB6333-86 standard, and the technical requirements comply with the JB/T6406-2006 standard. It is matched with the Ed series thruster that complies with the DIN15430 standard.Main features:▲ Interlocking type equal clearance device and automatic tile positioning device can always maintain equal clearance of both sides of the tile without adjustment, completely avoiding the phenomenon of one side of the brake pad floating against the brake wheel due to uneven clearance;The main swing hinge points are equipped with self-lubricating bearings, which have high transmission efficiency, long service life, and do not require lubrication during use;The brake spring is arranged inside the square tube and equipped with a ruler, allowing users to easily read the braking torque value, eliminating the hassle of measurement and calculation;▲ The brake pad is a card type integral molding structure, which is very convenient and fast to replace. It is equipped with brake pads of different materials such as semi metal (asbestos free) hard and semi hard, soft (asbestos free), etc. for users to choose from;▲ Equipped with Ed series electric hydraulic thruster products, with sensitive action and long service life;▲ Normally closed design, (power-off) spring brake, (powered on) thruster release.Working conditions:◆ Altitude:<2000m;◆ Environmental temperature: -20 ° C to+40 ° C;Relative humidity: ≤ 90%;Work schedule: intermittent (S3-60%) and continuous (S1);Power supply voltage: three-phase AC, AC380 50Hz (other power levels can be customized as needed);When there are special requirements, they should be negotiated and determined during the ordering process.Basic parameters:● Product model: YWZ5-160、YWZ5-200、YWZ5-250、YWZ5-315、YWZ5-400、YWZ5-500、YWZ5-630、YWZ5-710、YWZ5-800Applicable wheel diameter: 160-800mmBraking torque: 80-12500Nm● Product model: YWZ9-160、YWZ9-200、YWZ9-250、YWZ9-300、YWZ9-315、YWZ9-400、YWZ9-500、YWZ9-600、YWZ9-630、YWZ9-700、YWZ9-710、YWZ9-800Applicable wheel diameter: 160-800mmBraking torque: 80-12500Nm

YWZ3B series electric hydraulic drum brake

Application:The YWZ3B series electric hydraulic drum brake is widely used for deceleration and parking (maintenance) braking of various mechanisms in lifting and transportation, belt transportation, port loading and unloading, metallurgy, and construction machinery with explosion-proof requirements.Compliance with standards:The connection dimensions and braking torque parameters of the YWZ3B series electric hydraulic drum brake comply with the GB6333-86 standard, and the technical requirements comply with the JB/T6406-2006 standard; This series replaces the original YWZ3 series brake.Main features:▲ Equipped with card brake pads for easy and quick replacement during production;The main swing hinge points are equipped with self-lubricating bearings, which have high transmission efficiency, long service life, and do not require lubrication during use;▲ Adopting YT1 series electric hydraulic thruster thruster;▲ Normally closed design, (power-off) spring brake, (powered on) thruster release.Working conditions:◆ Altitude:<2000m;◆ Environmental temperature: -20 ° C to+40 ° C;Relative humidity: ≤ 90%;Work schedule: intermittent (S3-60%) and continuous (S1);Power supply voltage: three-phase AC, AC380 50Hz (other power levels can be customized as needed);When there are special requirements, they should be negotiated and determined during the ordering process.Basic parameters:● Product model: YWZ3B-160、YWZ3B-200、YWZ3B-250、YWZ3B-315、YWZ3B-400、YWZ3B-500、YWZ3B-630、YWZ3B-710、YWZ3B-800Applicable wheel diameter: 160-800mmBraking torque: 80-12000Nm

YWW, YWK series electric hydraulic drum brakes

Application:The YWW and YKW series electric hydraulic block brakes are horizontally installed brakes (installed horizontally relative to the brake wheel axis), mainly used for deceleration braking of rotating mechanisms such as gantry cranes and tower cranes..Compliance with standards:The connection dimensions and braking torque parameters of the YWW and YWK series electric hydraulic drum brakes comply with the GB6333-86 standard, and the technical requirements comply with the JB/T6406-2006 standard. They are matched with Ed series thrusters that comply with the DIN15430 standard.Main features:▲ Interlocking type equal clearance device and automatic tile positioning device can always maintain equal clearance of both sides of the tile without adjustment, completely avoiding the phenomenon of one side of the brake pad floating against the brake wheel due to uneven clearance;The main swing hinge points are equipped with self-lubricating bearings, which have high transmission efficiency, long service life, and do not require lubrication during use;The brake spring is arranged inside the square tube and equipped with a ruler, allowing users to easily read the braking torque value, eliminating the hassle of measurement and calculation;▲ The brake pad is a card type integral molding structure, which is very convenient and fast to replace. It is equipped with brake pads of different materials such as semi metal (asbestos free) hard and semi hard, soft (asbestos free), etc. for users to choose from;▲ Equipped with Ed series electric hydraulic thruster products, with sensitive action and long service life;Working conditions:◆ Altitude:<2000m;◆ Environmental temperature: -20 ° C to+40 ° C;Relative humidity: ≤ 90%;Work schedule: intermittent (S3-60%) and continuous (S1);Power supply voltage: three-phase AC, AC380 50Hz (other power levels can be customized as needed);When there are special requirements, they should be negotiated and determined during the ordering process.Basic parameters:YWW series drum brake:● Product model: YWW200-300、YWW300-300（500）、YWW315-300（500）、YWW400-300（500、800）、YWW500-800（1250、2000）Applicable wheel diameter: 200-800mmBraking torque: 80-12500NmYKW series drum brake:Product models: YKW200-300, YKW300-300 (500), YKW315-300 (500), YKW400-500Brake disc diameter (mm): 200, 300, 315, 400Braking torque (Nm): 280~800

YW-L series electric hydraulic drum brake

Application:YW, YWZ13 series electric hydraulic drum brakes are widely used for deceleration and parking (maintenance) braking of various mechanisms in lifting and transportation, belt transportation, port loading and unloading, metallurgy, and construction machinery with explosion-proof requirements.Compliance with standards:The connection dimensions and braking torque parameters of YW-L series brakes comply with JB/T6406-2006 standards and DIN15435 standards. Equipped with Ed series thrusters that comply with DIN15430 standards.Main features:▲ Interlocking type equal clearance device and automatic tile positioning device can always maintain equal clearance of both sides of the tile without adjustment, completely avoiding the phenomenon of one side of the brake pad floating against the brake wheel due to uneven clearance;The main swing hinge points are equipped with self-lubricating bearings, which have high transmission efficiency, long service life, and do not require lubrication during use;The brake spring is arranged inside the square tube and equipped with a ruler, allowing users to easily read the braking torque value, eliminating the hassle of measurement and calculation;▲ The brake pad is a card type integral molding structure, which is very convenient and fast to replace. It is equipped with brake pads of different materials such as semi metal (asbestos free) hard and semi hard, soft (asbestos free), etc. for users to choose from;▲ Equipped with Ed series electric hydraulic thruster products, with sensitive action and long service life;▲ Normally closed design, (power-off) spring brake, (powered on) thruster release.Working conditions:◆ Altitude:<2000m;◆ Environmental temperature: -20 ° C to+40 ° C;Relative humidity: ≤ 90%;Work schedule: intermittent (S3-60%) and continuous (S1);Power supply voltage: three-phase AC, AC380 50Hz (other power levels can be customized as needed);When there are special requirements, they should be negotiated and determined during the ordering process.Basic parameters:Product models: YW-L200, YW-L250, YW-L315, YW-L400, YW-L500Applicable wheel diameter: 200-500mmBraking torque: 200-4100Nm

YW-K series normally open electric hydraulic drum brake

Application:The YW-K series electric hydraulic drum brake is mainly used for deceleration braking of large vehicle operating mechanisms of various general bridges and gantry cranes, and can also be used for deceleration braking of non lifting winch drive devices.Compliance with standards:The connection dimensions and technical requirements of YW-K series brakes comply with JB/T6406-2006 standards, and the braking torque parameters comply with DIN15435 standards. Equipped with Ed series thrusters that comply with DIN15430 standards.Main features:▲ Interlocking type equal clearance device and automatic tile positioning device can always maintain equal clearance of both sides of the tile without adjustment, completely avoiding the phenomenon of one side of the brake pad floating against the brake wheel due to uneven clearance;The main swing hinge points are equipped with self-lubricating bearings, which have high transmission efficiency, long service life, and do not require lubrication during use;▲ The brake pad is a card type integral molding structure, which is very convenient and fast to replace. It is equipped with brake pads of different materials such as semi metal (asbestos free) hard and semi hard, soft (asbestos free), etc. for users to choose from;▲ Equipped with Ed series electric hydraulic thruster products, with sensitive action and long service life;▲ Normally open design, (powered on) thruster brake, (powered off) spring release.Working conditions:◆ Altitude:<2000m;◆ Environmental temperature: -20 ° C to+40 ° C;Relative humidity: ≤ 90%;Work schedule: intermittent (S3-60%) and continuous (S1);Power supply voltage: three-phase AC, AC380 50Hz (other power levels can be customized as needed);When there are special requirements, they should be negotiated and determined during the ordering process.Basic parameters:Product models: YW-K160, YW-K200, YW-K250, YW-K300, YW-K315, YW-K400, YW-K500Applicable wheel diameter: 200-500mmBraking torque: 100-3550Nm

YW-E series electric hydraulic drum brake

Application:The YW-E series electric hydraulic drum brake is widely used in the large vehicle operating mechanism of various large and medium-sized outdoor cranes, with superior deceleration braking performance and ideal windproof braking effect; This product can also be used for the large and small car operating mechanisms of large special cranes, achieving smooth deceleration braking and reliable maintenance braking; This product also has ideal braking performance for working brakes used in belt transportation.The YW-E series brake is a two-step braking device. Firstly, apply a small (adjustable within the specified range as needed) braking torque to achieve a smoother deceleration braking. After the mechanism stops moving, the second step of braking begins and an additional braking time is added. The adjustment can be made through the one-way speed control valve in the damping cylinder circuit according to actual needs (with an adjustment range of 1-15 seconds).Compliance with standards:The connection dimensions and braking torque parameters of YW-E series brakes comply with JB/T6406-2006, JB/ZQ4388-86 (with A series), and DIN15435 standards. Equipped with Ed series thrusters that comply with DIN15430 standards.Main features:▲ Interlocking type equal clearance device and automatic tile positioning device can always maintain equal clearance of both sides of the tile without adjustment, completely avoiding the phenomenon of one side of the brake pad floating against the brake wheel due to uneven clearance;The main swing hinge points are equipped with self-lubricating bearings, which have high transmission efficiency, long service life, and do not require lubrication during use;The brake spring is arranged inside the square tube and equipped with a ruler, allowing users to easily read the braking torque value, eliminating the hassle of measurement and calculation;▲ The brake pad is a card type integral molding structure, which is very convenient and fast to replace. It is equipped with brake pads of different materials such as semi metal (asbestos free) hard and semi hard, soft (asbestos free), etc. for users to choose from;▲ Equipped with Ed series electric hydraulic thruster products, with sensitive action and long service life;▲ Normally closed design, (power-off) spring brake, (powered on) thruster release.Working conditions:◆ Altitude:<2000m;◆ Environmental temperature: -20 ° C to+40 ° C;Relative humidity: ≤ 90%;Work schedule: intermittent (S3-60%) and continuous (S1);Power supply voltage: three-phase AC, AC380 50Hz (other power levels can be customized as needed);When there are special requirements, they should be negotiated and determined during the ordering process.Basic parameters:Product models: YW-E200, YW-E250, YW-E300, YW-E315, YW-E400Applicable wheel diameter: 200-400mmBraking torque: 200-2500Nm

YW, YWZ13 series electric hydraulic drum brake

Application:YW, YWZ13 series electric hydraulic drum brakes are widely used for deceleration and parking (maintenance) braking of various mechanisms in lifting and transportation, belt transportation, port loading and unloading, metallurgy, and construction machinery with explosion-proof requirements.Compliance with standards:The connection dimensions and technical requirements of YW, YWZ13 series electric hydraulic drum brakes comply with JB/T6406-2006 standard; The braking torque parameters comply with DIN15435 standard and are matched with Ed series thrusters that comply with DIN15430 standard.Main features:▲ Interlocking type equal clearance device and automatic tile positioning device can always maintain equal clearance of both sides of the tile without adjustment, completely avoiding the phenomenon of one side of the brake pad floating against the brake wheel due to uneven clearance;The main swing hinge points are equipped with self-lubricating bearings, which have high transmission efficiency, long service life, and do not require lubrication during use;The brake spring is arranged inside the square tube and equipped with a ruler, allowing users to easily read the braking torque value, eliminating the hassle of measurement and calculation;▲ The brake pad is a card type integral molding structure, which is very convenient and fast to replace. It is equipped with brake pads of different materials such as semi metal (asbestos free) hard and semi hard, soft (asbestos free), etc. for users to choose from;▲ Equipped with Ed series electric hydraulic thruster products, with sensitive action and long service life;▲ Normally closed design, (power-off) spring brake, (powered on) thruster release.Working conditions:◆ Altitude:<2000m;◆ Environmental temperature: -20 ° C to+40 ° C;Relative humidity: ≤ 90%;Work schedule: intermittent (S3-60%) and continuous (S1);Power supply voltage: three-phase AC, AC380 50Hz (other power levels can be customized as needed);When there are special requirements, they should be negotiated and determined during the ordering process.Basic parameters:Product models: YW-160, YW-200, YW-250, YW-315, YW-400, YW-500, YW-630, YW-710, YW-800Applicable wheel diameter: 160-800mmBraking torque: 80-12500Nm● Product model: YWZ13-200、YWZ13-250、YWZ13-315、YWZ13-400、YWZ13-500、YWZ13-630、YWZ13-710、YWZ13-800Applicable wheel diameter: 200-800mmBraking torque: 80-12500Nm

DYW, BYWZ5 series electric hydraulic drum brake

Application:The DYW, BYWZ5 series electric hydraulic block brake is a type of brake that is installed horizontally (relative to the axis of the brake wheel), mainly used for deceleration braking of rotating mechanisms such as gantry cranes and tower cranes.Compliance with standards:The connection dimensions and technical requirements of DYW and BYWZ5 series brakes comply with JB/T6406-2006 standards, and the braking torque parameters comply with DIN15435 standards. The connection dimensions and braking torque parameters of the DYWZ5 series brake comply with the GB6333-86 standard, and the technical requirements comply with the JB/T6406-2006 standard. DYW and DYWZ5 series drum brakes are matched with Ed series explosion-proof thrusters that comply with GB3836.2. This series is applicable to places where explosive mixtures of combustible gases and air are formed in temperature groups T1-T4 of IIA, IIB, and IIC.Main features:▲ Interlocking type equal clearance device and automatic tile positioning device can always maintain equal clearance of both sides of the tile without adjustment, completely avoiding the phenomenon of one side of the brake pad floating against the brake wheel due to uneven clearance;The main swing hinge points are equipped with self-lubricating bearings, which have high transmission efficiency, long service life, and do not require lubrication during use;The brake spring is arranged inside the square tube and equipped with a ruler, allowing users to easily read the braking torque value, eliminating the hassle of measurement and calculation;▲ The brake pads are explosion-proof pads with a card type integral molding structure, making replacement very convenient and fast.▲ The unit is equipped with our company's explosion-proof thruster, which is sensitive in action and has a long service life;Working conditions:◆ Altitude:<2000m;◆ Environmental temperature: -20 ° C to+40 ° C;Relative humidity: ≤ 90%;Work schedule: intermittent (S3-60%) and continuous (S1);Power supply voltage: three-phase AC, AC380 50Hz (other power levels can be customized as needed);When there are special requirements, they should be negotiated and determined during the ordering process.Basic parameters:DYW series drum brake:Product Model: DYW160-300、DYW200-300、DYW315-300(500、800)、DYW400-500(800、1250)、DYW500-800(1250、2000)Brake disc diameter (mm): 160, 200, 250, 315, 400, 500Braking torque (Nm): 80~4000BYWZ5 series drum brake:Product Model: BYWZ5-160/30、BYWZ5-200/30、BYWZ5-250/30(50)、BYWZ5-315/30(50、80)、BYWZ5-400/50(80、1250)、BYWZ5-500/80(1250、200)、Brake disc diameter (mm): 160, 200, 250, 315, 400, 500Braking torque (Nm): 80~4000

QYWZ5 series pneumatic drum brake

Application:Pneumatic drum brakes can be widely used for deceleration and parking braking of various mechanisms in lifting, belt transportation, port loading and unloading, and metallurgical machinery equipped with air sources on site.Compliance with standards:The connection dimensions and braking torque parameters of QW series brakes comply with JB/T6406-2006 and DIN15435 standards, and the technical requirements comply with JB/T6406-2006 standards;The connection dimensions and braking torque parameters of QWZ5 series brakes comply with GB6333-86 standard, and the technical requirements comply with JB/T6406-2006 standard.Main features:▲ Interlocking type equal clearance device and automatic tile positioning device can always maintain equal clearance of both sides of the tile without adjustment, completely avoiding the phenomenon of one side of the brake pad floating against the brake wheel due to uneven clearance;The main swing hinge points are equipped with self-lubricating bearings, which have high transmission efficiency, long service life, and do not require lubrication during use;The brake spring is arranged inside the square tube and equipped with a ruler, allowing users to easily read the braking torque value, eliminating the hassle of measurement and calculation;▲ The brake pad is a card type integral molding structure, which is very convenient and fast to replace. It is equipped with brake pads of different materials such as semi metal (asbestos free) hard and semi hard, soft (asbestos free), etc. for users to choose from;▲ Equipped with SC series cylinder products, with sensitive action and long service life;▲ Normally closed design, (air cut) spring brake, (air vent) air pressure release.Working conditions:◆ Environmental temperature: -20 ° C to+50 ° C;Working pressure: 0.5-0.7Mpa;Work schedule: intermittent (S3-60%) and continuous (S1);When there are special requirements, they should be negotiated and determined during the ordering process.Basic parameters:● Product model:QW160QW200,QW250,QW315,QW400,QW500,QW600,QW630,QW710,QW700,QW800、QWZ5-200,QWZ5250,QWZ5315,QWZ5400,QWZ5500,QWZ5600,QWZ5630,QWZ5710,QWZ5700,QWZ5800Applicable wheel diameter: 160-800mmBraking torque: 80-10000Nm