YZ, PYZW.YPA series hydraulic station

Application:The YZ, PYZW, YPA series hydraulic stations are mainly used for supporting the drive of SB, SBD, STSH, YP series safety brakes, and can also be used as supporting drives for other single acting oil cylinders. When adding the suffix - I to the hydraulic station model, it is used to match the single mechanism safety brake, controlling the brake to open and close simultaneously; When adding the suffix - II to the hydraulic station model, it is used to match the dual mechanism safety brake. The brake that controls each oil circuit can be opened and closed simultaneously or operated separately. If used for separate actions of other multiple mechanisms, special instructions should be provided when ordering.The YPA series hydraulic station is mainly used for the matching drive of YLZ series wheel side brakes and YGZ series top rail actuators, and can also be used as other single acting systemsMain features:▲ The main hydraulic components are from well-known domestic and foreign brands, with stable and reliable performance. According to customer requirements, hydraulic components from brands such as Rexroth, Parker, Vickers, etc. can also be selected..▲ Multi functional composite control method, relying on manpower to achieve the pressure up process during power-off maintenance▲ Compact structure, beautiful appearance, stable pressure holding performance,Equipped with a dust cover, it can adapt to outdoor operations;▲ Equipped with manual opening device (manual pump)▲ The electrical control is simple, and by adding various limit switches, it is easy to achieve remote and dangerous area operation control, as well as computer (PLC) automatic control.Working conditions:Relative humidity: ≤ 90%;Power supply voltage: three-phase AC, AC380 50Hz (other power levels can be customized as needed);When there are special requirements, they should be negotiated and determined during the ordering process.Basic parameters:YZ series disc hydraulic station:Product models: YZ-10-10, YZ-20-10, YZ-10-20, YZ-20-20Applicable products: Suitable for safety brakesRated working pressure (Mpa): 8, 12, 14, 16, 20PYZW series disc hydraulic station:Product models: YPZW-IA, YPZW-IIAApplicable products: Suitable for safety brakes, windproof brakesRated working pressure (Mpa): 8, 10, 12YPA series disc hydraulic station:Product models: YPA1.5, YPA2.0, YPZ3.0Applicable products: Suitable for safety brakes, windproof brakesRated working pressure (Mpa): 8, 10, 12

YTD, MYT2 series electric hydraulic thruster

Application:The electric hydraulic thruster with electric magnet maintenance function is a compact drive control device that integrates an electric motor, centrifugal pump, oil cylinder, and DC electromagnet. It is widely used as a drive device for various drum brakes and disc brakes, especially suitable for brakes that require long-term power to maintain an open state. It can also be used for drive control of various industrial valves, gates, directional swing and rotation (<90 °) devices (mechanisms), and clamping devices.Compliance with standards:The DEd series electric hydraulic thruster complies with DIN15430 standard.Main features:The shell is made of cast aluminum alloy, which is lightweight and aesthetically pleasing;The motor is a non oil immersed structure with F-class insulation, good heat resistance, and long service life;The motor junction box cover is sealed and uses cable stuffing boxes for incoming wires, which are firm and reliable. The electrical enclosure protection level reaches IP65;The motor shaft and push rod have undergone special surface treatment, greatly extending the lifespan of the sealing components;The oil cylinder housing is equipped with a balance chamber on one side, which allows the thruster to be installed in any direction from 0-180 °, thereby expanding its range of use;All seals and bearings are made of world-class products, ensuring reliable sealing and long service life.Working conditions:◆ Altitude:<2000m;◆ Environmental temperature: When the temperature is between -20 ℃ and+50 ℃, use DB-25 hydraulic oil. When the temperature is below -20 ℃, use YH-10 aviation hydraulic oil;Relative humidity: ≤ 90%;Work schedule: intermittent (S3-60%) and continuous (S1);Power supply voltage: three-phase AC, AC380 50Hz (other power levels can be customized as needed);◆ Cable: The specification of the power cable is 4 × 1.5mm ², and the cross-sectional area of the wire can reach 4 × 2.5mm ²;When there are special requirements, they should be negotiated and determined during the ordering process.Basic parameters:Ed electric hydraulic thruster modelYTD electric hydraulic thruster model● Product model: YTD220-50,YTD300-50,YTD500-60,YTD800-60,YTD1250-60,YTD3000-60,YTD500-120,YTD800-120,YTD1250-120,YTD2000-120,YTD3000-120,YTD4500-80,YTD3000-80MYT2 electric hydraulic thruster modelMYT2-10/25,MYT2-25/4,MYT2-25/5,MYT2-50/6,MYT2-100/6,MYT2-125/6,MYT2-125/10,MYT2-200/6,MYT2-200/12,MYT2-300/6,MYT2-300/12Rated thrust: 220-6300NRated travel: 50-120mm

YT1 series electric hydraulic thruster

Application:The YT1 series electric hydraulic thruster is a compact drive control device that integrates an electric motor, centrifugal pump, and oil cylinder. It can be used as a drive device for drum brakes such as YWZ4 and YWZ4-A series, as well as for various industrial valves, gates, directional swing and rotation (vertical upward rotation) devices (mechanisms), and clamping devices.Working conditions:◆ Altitude:<2000m;◆ Environmental temperature: When the temperature is between -20 ℃ and+50 ℃, use DB-25 hydraulic oil. When the temperature is below -20 ℃, use YH-10 aviation hydraulic oil;Relative humidity: ≤ 90%;◆ Work schedule: Short term (S2-30min/60min);Power supply voltage: three-phase AC, AC380 50Hz (other power levels can be customized as needed);When there are special requirements, they should be negotiated and determined during the ordering process.Basic parameters:Product models: YT1-18, YT1-25, YT1-45Z, YT1-90, YT1-125, YT1-180, YT1-320Rated thrust: 180-3200NRated travel: 20-200mm

Ed series electric hydraulic thruster

Application:Electric hydraulic thruster is a compact drive control device that integrates an electric motor, centrifugal pump, and oil cylinder. It is widely used as a drive device for various drum brakes and disc brakes, as well as for various industrial valves, gates, directional swing and rotation (<90 °) devices (mechanisms), and clamping devices.Compliance with standards:The Ed series electric hydraulic thruster complies with DIN15430 standard.Main features:The shell is made of cast aluminum alloy, which is lightweight and aesthetically pleasing;The motor is a non oil immersed structure with F-class insulation, good heat resistance, and long service life;The motor junction box cover is sealed and uses cable stuffing boxes for incoming wires, which are firm and reliable. The electrical enclosure protection level reaches IP65;The motor shaft and push rod have undergone special surface treatment, greatly extending the lifespan of the sealing components;The oil cylinder housing is equipped with a balance chamber on one side, which allows the thruster to be installed in any direction from 0-180 °, thereby expanding its range of use;All seals and bearings are made of world-class products, ensuring reliable sealing and long service life.Working conditions:◆ Altitude:<2000m;◆ Environmental temperature: When the temperature is between -20 ℃ and+50 ℃, use DB-25 hydraulic oil. When the temperature is below -20 ℃, use YH-10 aviation hydraulic oil;Relative humidity: ≤ 90%;Work schedule: intermittent (S3-60%) and continuous (S1);Power supply voltage: three-phase AC, AC380 50Hz (other power levels can be customized as needed);◆ Cable: The specification of the power cable is 4 × 1.5mm ², and the cross-sectional area of the wire can reach 4 × 2.5mm ²;When there are special requirements, they should be negotiated and determined during the ordering process.Basic parameters:● Product model: Ed 23/5、Ed 30/5、Ed 40/5、Ed 50/6、Ed 70/5、Ed 80/6、Ed 100/6、Ed 121/6、Ed201/6、Ed 301/6、Ed 50/12、Ed 80/12、Ed 121/12、Ed 201/12、Ed 301/12、Ed 450/12、Ed 630/12、Ed121/8、Ed 201/8、Ed 301/8、Ed 450/8Rated thrust: 220-6300NRated travel: 50-120mm

DYT series electric hydraulic thruster

Application:The DYT series electro-hydraulic push rod is a hydraulic drive device that integrates machinery, electricity, and fluid. It can be widely used for driving and controlling valves, gates, reversing, tilting, swinging, and other machinery in metallurgy, building materials, chemical industry, lifting transportation, and port loading and unloading machinery. It can replace traditional electric push rods, hydraulic cylinders (driven by hydraulic stations), and cylinders (driven and controlled by air pump stations).Compliance with standards:The DEd series electric hydraulic thruster complies with DIN15430 standard.Main features:▲ Compact structure, easy installation, small space occupation, and simple maintenance.There is a bidirectional pressure holding self-locking device in the circuit, which can stop and lock at any position within the specified travel range, while maintaining the same output force.When the mechanism experiences an accident and power outage, the push rod can automatically lock in that position to avoid accidents. The motor shaft and push rod have undergone special surface treatment, greatly extending the lifespan of the sealing components;All hydraulic devices are concentrated inside the machine body, without external pipelines. The oil cylinder seals are made of imported products, with good sealing effect, no oil leakage pollution, and long service life.▲ The electrical control is simple, and by adding various limit switches, it is easy to achieve remote and dangerous area operation control, as well as computer (PLC) automatic control.Working conditions:◆ Altitude:<2000m;Relative humidity: ≤ 90%;Work schedule: intermittent (S3-60%) and continuous (S1);Power supply voltage: three-phase AC, AC380 50Hz (other power levels can be customized as needed);When there are special requirements, they should be negotiated and determined during the ordering process.Basic parameters:DYT1 series electro-hydraulic push rod:Tension/thrust (10N): 400/630, 500/800, 630/1000, 800/1250, 1250/2000Travel (mm): 620, 900, 1000, 1250, 1400DYTZW series electro-hydraulic push rod:Tension/thrust (10N): 800/1000, 1250/1600, 2000/2500, 3200/4200, 5000/6500, 7500/10000Travel (mm): 400, 550, 800, 1000, 1400, 1800DYTP series electro-hydraulic push rod:Tension/thrust (10N): 1250/1600, 2000/2500, 3200/4000, 5000/6500, 8000/10000, 11500/15000Travel (mm): 550, 800, 1000, 1400, 1800, 2200

DEd series electric hydraulic thruster

Application:The electric hydraulic thruster with electric magnet maintenance function is a compact drive control device that integrates an electric motor, centrifugal pump, oil cylinder, and DC electromagnet. It is widely used as a drive device for various drum brakes and disc brakes, especially suitable for brakes that require long-term power to maintain an open state. It can also be used for drive control of various industrial valves, gates, directional swing and rotation (<90 °) devices (mechanisms), and clamping devices.Compliance with standards:The DEd series electric hydraulic thruster complies with DIN15430 standard.Main features:The shell is made of cast aluminum alloy, which is lightweight and aesthetically pleasing;The motor is a non oil immersed structure with F-class insulation, good heat resistance, and long service life;The motor junction box cover is sealed and uses cable stuffing boxes for incoming wires, which are firm and reliable. The electrical enclosure protection level reaches IP65;The motor shaft and push rod have undergone special surface treatment, greatly extending the lifespan of the sealing components;The oil cylinder housing is equipped with a balance chamber on one side, which allows the thruster to be installed in any direction from 0-180 °, thereby expanding its range of use;All seals and bearings are made of world-class products, ensuring reliable sealing and long service life.Working conditions:◆ Altitude:<2000m;◆ Environmental temperature: When the temperature is between -20 ℃ and+50 ℃, use DB-25 hydraulic oil. When the temperature is below -20 ℃, use YH-10 aviation hydraulic oil;Relative humidity: ≤ 90%;Work schedule: intermittent (S3-60%) and continuous (S1);Power supply voltage: three-phase AC, AC380 50Hz (other power levels can be customized as needed);◆ Cable: The specification of the power cable is 4 × 1.5mm ², and the cross-sectional area of the wire can reach 4 × 2.5mm ²;When there are special requirements, they should be negotiated and determined during the ordering process.Basic parameters:● Product model: DEd500-60（120）、DEd800-60（120）、DEd1250-60（80、120）、DEd2000-60（80、120）、DEd3000-60（80、120）、DEd4500-80（120）Power (W): 40Power supply (Nm): 110/220V;  220V/380V     AC 50/60 Hz (other power levels can be customized according to requirements)Rated thrust: 500-4500NRated travel: 60-120mm

SP series pneumatic failure protection brake

Application:Compared with drum brakes, SP series fail safe disc brakes have the advantages of compact structure, large braking force, and easy installation. They are mainly used for mechanical braking or deceleration in various industries such as lifting, transportation, metallurgy, mining, ports, construction machinery, cables, suspension equipment, wind turbines, textile machinery, etcCompliance with standards:ADP caliper disc brake technology requirements comply with JB/T10917-2008 standard.Main features:▲ Strong braking force, low maintenance cost, equipped with automatic compensation device for pad wear (stable braking torque), short response time.▲ Large installation tolerance: Brake disc end face runout, value ± 0.2mm. The perpendicularity deviation of the base relative to the disc, large value ± 4%.▲ Deviation of the center distance of the brake disc relative to the base, with a maximum value of ± 2.5mm;Working conditions:◆ Environmental temperature: -20 ℃~+50 ℃There must be no flammable or explosive gases in the surrounding work environment.The relative humidity of the air should not exceed 90%.The altitude of the usage location complies with GB755-2008.Gas source requirements: The compressed air entering the gas bag should be dry, clean, and free of corrosive gases;When there are special requirements, they should be negotiated and determined during the ordering process.Basic parameters:Product models: 450SP, 5SP, 4SP, 3SP● Braking force: 1650-10170N

QPN and CQPN series pneumatic caliper disc brakes

Application:QPDN and CQPDN series pneumatic disc brakes are widely used for parking or deceleration braking of small and medium-sized drive mechanisms. The tension braking of winding mechanisms, such as the tension control of paper rolls in paper mills, the tension control of news paper during news printing, the tension control of steel plate (steel wire) rolls during unwinding, and the tension control of wire and cable unwinding and cable unwinding.Compliance with standards:The technical requirements for caliper disc brakes comply with JB/T10917-2008 standard.Main features:The QPN series is a normally closed design: spring brake, pneumatic release (opening); The CQPN series is a normally open design: air pressure braking, spring release, braking force can vary with changes in air pressure, and can be flexibly changed according to needs during use;▲ Compact structure, small size, sensitive action, light weight, and easy to use;▲ Card mounted asbestos free brake pads, green and environmentally friendly, easy and fast to replace;▲ Installation method: Suitable for horizontal or vertical axis braking. When using the horizontal axis braking method, it can be installed at any angle around the brake disc, but it is better to install it horizontally; When using the vertical axis braking method, the angle is not limited. A brake disc can be installed with one brake or two or more brakes, but it is recommended to install two or more brakes symmetrically as much as possible;▲ All power sources do not need to be separately set up and can be connected to existing air compression stations for use. A speed regulating valve is installed in the gas supply line, and the braking time can be infinitely adjusted.Working conditions:◆ Environmental temperature: -20 ° C to+40 ° C;Work pressure: 7 bar;Gas source requirements: The compressed air entering the gas bag should be dry, clean, and free of corrosive gases;When there are special requirements, they should be negotiated and determined during the ordering process.Basic parameters:Product model: QPD □, CQPD □Applicable disc diameter: Ø D ≥ 610mm

QPL-B (CQPL-B) series pneumatic caliper disc brake

Application:The QPL-B (CQPL-B) series pneumatic disc brake is widely used for parking or deceleration braking of small and medium-sized drive mechanisms. The tension braking of winding mechanisms, such as the tension control of paper rolls in paper mills, the tension control of news paper during news printing, the tension control of steel plate (steel wire) rolls during unwinding, and the tension control of wire and cable unwinding and cable unwinding.Compliance with standards:The technical requirements for caliper disc brakes comply with JB/T10917-2008 standard.Main features:The QPL-B series is a normally closed design: spring brake, pneumatic release (opening); The CQPL-B series is a normally open design: air pressure braking, spring release, braking force can vary with changes in air pressure, and can be flexibly changed according to needs during use;▲ Compact structure, small size, sensitive action, light weight, and easy to use;▲ Card mounted asbestos free brake pads, green and environmentally friendly, easy and fast to replace;▲ Installation method: Suitable for horizontal or vertical axis braking. When using the horizontal axis braking method, it can be installed at any angle around the brake disc, but it is installed horizontally; When using the vertical axis braking method, the angle is not limited. A brake disc can be installed with one brake or two or more brakes, but it is recommended to install two or more brakes symmetrically as much as possible;▲ All power sources do not need to be separately set up and can be connected to existing air compression stations for use. A speed regulating valve is installed in the gas supply line, and the braking time can be infinitely adjusted.Working conditions:◆ Environmental temperature: -20 ° C to+40 ° C;Work pressure: 7 bar;Gas source requirements: The compressed air entering the gas bag should be dry, clean, and free of corrosive gases;When there are special requirements, they should be negotiated and determined during the ordering process.Basic parameters:Product model: QPL2.7-BProduct model: CQPL12.7-BApplicable disc diameter: Ø D ≥ 200mm

QPL-A (CQPL-A) series pneumatic caliper disc brake

Application:The QPL-A (CQPL-A) series pneumatic disc brake is widely used for parking or deceleration braking of small and medium-sized drive mechanisms. The tension braking of winding mechanisms, such as the tension control of paper rolls in paper mills, the tension control of news paper during news printing, the tension control of steel plate (steel wire) rolls during unwinding, and the tension control of wire and cable unwinding and cable unwinding.Compliance with standards:The technical requirements for caliper disc brakes comply with JB/T10917-2008 standard.Main features:The QPL-A series is a normally closed design: spring brake, pneumatic release (opening); The CQPL-A series is a normally open design: air pressure braking, spring release, braking force can vary with changes in air pressure, and can be flexibly changed according to needs during use;▲ Compact structure, small size, sensitive action, light weight, and easy to use;▲ Card mounted asbestos free brake pads, green and environmentally friendly, easy and fast to replace;▲ Installation method: Suitable for horizontal or vertical axis braking. When using the horizontal axis braking method, it can be installed at any angle around the brake disc, which is a horizontal installation; When using the vertical axis braking method, the angle is not limited. A brake disc can be installed with one brake or two or more brakes, but it is recommended to install two or more brakes symmetrically as much as possible;▲ All power sources do not need to be separately set up and can be connected to existing air compression stations for use. A speed regulating valve is installed in the gas supply line, and the braking time can be infinitely adjusted.Working conditions:◆ Environmental temperature: -20 ° C to+40 ° C;Work pressure: 7 bar;Gas source requirements: The compressed air entering the gas bag should be dry, clean, and free of corrosive gases;When there are special requirements, they should be negotiated and determined during the ordering process.Basic parameters:Product models: QPL2.7A-A, QPL12.7B-AProduct models: CQPL12.7A-A, CQPL12.7B-AApplicable disc diameter: Ø D ≥ 200mm

QP-D, CQP-D series pneumatic caliper disc brake

Application:QP-D and CQP-D series pneumatic disc brakes are widely used for parking or deceleration braking of small and medium-sized drive mechanisms. The tension braking of winding mechanisms, such as the tension control of paper rolls in paper mills, the tension control of news paper during news printing, the tension control of steel plate (steel wire) rolls during unwinding, and the tension control of wire and cable unwinding and cable unwinding.Compliance with standards:The technical requirements for caliper disc brakes comply with JB/T10917-2008 standard.Main features:The QP-D series features a normally closed design with spring braking and pneumatic release (opening); The CQP-D series is a normally open design: air pressure braking, spring release, braking force can vary with changes in air pressure, and can be flexibly changed according to needs during use;▲ Compact structure, small size, sensitive action, light weight, and easy to use;▲ Card mounted asbestos free brake pads, green and environmentally friendly, easy and fast to replace;▲ Installation method: Suitable for horizontal or vertical axis braking. When using the horizontal axis braking method, it can be installed at any angle around the brake disc, but it is installed horizontally; When using the vertical axis braking method, the angle is not limited. A brake disc can be installed with one brake or two or more brakes, but it is recommended to install two or more brakes symmetrically as much as possible;▲ All power sources do not need to be separately set up and can be connected to existing air compression stations for use. A speed regulating valve is installed in the gas supply line, and the braking time can be infinitely adjusted.Working conditions:◆ Environmental temperature: -20 ° C to+40 ° C;Work pressure: 7 bar;Gas source requirements: The compressed air entering the gas bag should be dry, clean, and free of corrosive gases;When there are special requirements, they should be negotiated and determined during the ordering process.Basic parameters:Product models: QP-D, CQP-DApplicable disc diameter: Ø D ≥ 610mm

QP-C series pneumatic caliper disc brake

Application:The QP-C series pneumatic disc brake is widely used for parking or deceleration braking of small and medium-sized drive mechanisms. The tension braking of winding mechanisms, such as the tension control of paper rolls in paper mills, the tension control of news paper during news printing, the tension control of steel plate (steel wire) rolls during unwinding, and the tension control of wire and cable unwinding and cable unwinding.Compliance with standards:The technical requirements for caliper disc brakes comply with JB/T10917-2008 standard.Main features:The QP-C series is a normally closed design: spring braking, pneumatic release (opening) with built-in automatic compensation, no need to adjust the friction plate clearance.▲ Compact structure, small size, sensitive action, light weight, and easy to use;▲ Card mounted asbestos free brake pads, green and environmentally friendly, easy and fast to replace;▲ Installation method: Suitable for horizontal or vertical axis braking. When using the horizontal axis braking method, it can be installed at any angle around the brake disc, but it is installed horizontally; When using the vertical axis braking method, the angle is not limited. A brake disc can be installed with one brake or two or more brakes, but it is recommended to install two or more brakes symmetrically as much as possible;▲ All power sources do not need to be separately set up and can be connected to existing air compression stations for use. A speed regulating valve is installed in the gas supply line, and the braking time can be infinitely adjusted.Working conditions:◆ Environmental temperature: -20 ° C to+40 ° C;Work pressure: 7 bar;Gas source requirements: The compressed air entering the gas bag should be dry, clean, and free of corrosive gases;When there are special requirements, they should be negotiated and determined during the ordering process.Basic parameters:Product models: QP12.7-C, QP15-CApplicable disc diameter: Ø D ≥ 200mm