QP and CQP series pneumatic caliper disc brakes

Application:QP □ and CQP □ series pneumatic disc brakes are widely used for parking or deceleration braking of small and medium-sized drive mechanisms. The tension braking of winding mechanisms, such as the tension control of paper rolls in paper mills, the tension control of news paper during news printing, the tension control of steel plate (steel wire) rolls during unwinding, and the tension control of wire and cable unwinding and cable unwinding.Compliance with standards:The technical requirements for caliper disc brakes comply with JB/T10917-2008 standard.Main features:▲ QP □ series is a normally closed design: spring brake, pneumatic release (opening); The CQP □ series is a normally open design: air pressure braking, spring release, braking force can vary with changes in air pressure, and can be flexibly changed according to needs during use;▲ Compact structure, small size, sensitive action, light weight, and easy to use;▲ Card mounted asbestos free brake pads, green and environmentally friendly, easy and fast to replace;▲ Installation method: Suitable for horizontal or vertical axis braking. When using the horizontal axis braking method, it can be installed at any angle around the brake disc, but it is better to install it horizontally; When using the vertical axis braking method, the angle is not limited. A brake disc can be installed with one brake or two or more brakes, but it is recommended to install two or more brakes symmetrically as much as possible;▲ All power sources do not need to be separately set up and can be connected to existing air compression stations for use. A speed regulating valve is installed in the gas supply line, and the braking time can be infinitely adjusted.Working conditions:◆ Environmental temperature: -20 ° C to+40 ° C;Work pressure: 7 bar;Gas source requirements: The compressed air entering the gas bag should be dry, clean, and free of corrosive gases;When there are special requirements, they should be negotiated and determined during the ordering process.Basic parameters:Product model: QP □, CQP □Applicable disc diameter: Ø D ≥ 200mm

PD series pneumatic caliper disc brake

Application:The PD series pneumatic disc brake is widely used for parking or deceleration braking of small and medium-sized drive mechanisms. The tension braking of winding mechanisms, such as the tension control of paper rolls in paper mills, the tension control of news paper during news printing, the tension control of steel plate (steel wire) rolls during unwinding, and the tension control of wire and cable unwinding and cable unwinding.Compliance with standards:The technical requirements for caliper disc brakes comply with JB/T10917-2008 standard.Main features:The PD series features a normally closed design with spring braking and pneumatic release (opening)▲ Compact structure, small size, sensitive action, light weight, and easy to use;▲ Card mounted asbestos free brake pads, green and environmentally friendly, easy and fast to replace;▲ Installation method: Suitable for horizontal or vertical axis braking. When using the horizontal axis braking method, it can be installed at any angle around the brake disc, but it is installed horizontally; When using the vertical axis braking method, the angle is not limited. A brake disc can be installed with one brake or two or more brakes, but it is recommended to install two or more brakes symmetrically as much as possible;▲ All power sources do not need to be separately set up and can be connected to existing air compression stations for use. A speed regulating valve is installed in the gas supply line, and the braking time can be infinitely adjusted.Working conditions:◆ Environmental temperature: -20 ° C to+40 ° C;Work pressure: 7 bar;Gas source requirements: The compressed air entering the gas bag should be dry, clean, and free of corrosive gases;When there are special requirements, they should be negotiated and determined during the ordering process.Basic parameters:Product models: PDA5, PDA10Product models: PDB5, PDB10, PDB19Product models: PDC5, PDC10Product models: PDD14, PDD32Product models: PDE5, PDE10,Product models: PDCA2, PDCA4, PDCA8, PDCA14Applicable disc diameter: Ø D ≥ 200mm

PDA series pneumatic disc brake

Jiaozuo Linrui Brake Co., Ltd. is a manufacturer of various transmission equipment such as electric hydraulic brakes, electric hydraulic thrusters, hydraulic disc brakes, electromagnetic disc brakes, pneumatic disc brakes, electromagnetic block brakes, explosion-proof electric hydraulic thrusters, explosion-proof electric hydraulic compression brakes, wind power yaw brakes, high-speed shaft brakes, wind power brake pads, disc brake friction pads, electric hydraulic brake pads, electromagnetic clutches, electromagnetic brakes, brake motors, etc. We have many years of sales and experience in wind power, lifting, metallurgy, ports, water conservancy related products and services.

CQP-A/B/F series pneumatic caliper disc brake

Application:CQP-A/B/F series pneumatic disc brakes are widely used for parking or deceleration braking of small and medium-sized drive mechanisms. The tension braking of winding mechanisms, such as the tension control of paper rolls in paper mills, the tension control of news paper during news printing, the tension control of steel plate (steel wire) rolls during unwinding, and the tension control of wire and cable unwinding and cable unwinding.Compliance with standards:The technical requirements for caliper disc brakes comply with JB/T10917-2008 standard.Main features:CQP-A/B/F series is a normally open design: air pressure braking, spring release, braking force can change with the change of air pressure, and can be flexibly changed according to needs during use;▲ Compact structure, small size, sensitive action, light weight, and easy to use;▲ Card mounted asbestos free brake pads, green and environmentally friendly, easy and fast to replace;▲ Installation method: Suitable for horizontal or vertical axis braking. When using the horizontal axis braking method, it can be installed at any angle around the brake disc, but it is installed horizontally; When using the vertical axis braking method, the angle is not limited. A brake disc can be installed with one brake or two or more brakes, but it is recommended to install two or more brakes symmetrically as much as possible;▲ All power sources do not need to be separately set up and can be connected to existing air compression stations for use. A speed regulating valve is installed in the gas supply line, and the braking time can be infinitely adjusted.Working conditions:◆ Environmental temperature: -20 ° C to+40 ° C;Work pressure: 7 bar;Gas source requirements: The compressed air entering the gas bag should be dry, clean, and free of corrosive gases;When there are special requirements, they should be negotiated and determined during the ordering process.Basic parameters:Product models: CQP10-A, CQP10-B, CQP10-F, CQP20-A, CQP20-B, CQP20-F, CQP38-A, CQP38-B, CQP38-FCQPL38IA-,CQPL38I-BApplicable disc diameter: Ø D ≥ 200mm

ADP series pneumatic disc brake

Application:ADP series pneumatic disc brakes are widely used for parking or deceleration braking of small and medium-sized drive mechanisms. The tension braking of winding mechanisms, such as the tension control of paper rolls in paper mills, the tension control of news paper during news printing, the tension control of steel plate (steel wire) rolls during unwinding, and the tension control of wire and cable unwinding and cable unwinding.Compliance with standards:ADP caliper disc brake technology requirements comply with JB/T10917-2008 standard.Main features:The PD series features a normally closed design with spring braking and pneumatic release (opening)▲ Compact structure, small size, sensitive action, light weight, and easy to use;▲ Card mounted asbestos free brake pads, green and environmentally friendly, easy and fast to replace;▲ Installation method: Suitable for horizontal or vertical axis braking. When using the horizontal axis braking method, it can be installed at any angle around the brake disc, but it is installed horizontally; When using the vertical axis braking method, the angle is not limited. A brake disc can be installed with one brake or two or more brakes, but it is recommended to install two or more brakes symmetrically as much as possible;▲ All power sources do not need to be separately set up and can be connected to existing air compression stations for use. A speed regulating valve is installed in the gas supply line, and the braking time can be infinitely adjusted.Working conditions:◆ Environmental temperature: -20 ° C to+40 ° C;Work pressure: 15 bar;Gas source requirements: The compressed air entering the gas bag should be dry, clean, and free of corrosive gases;When there are special requirements, they should be negotiated and determined during the ordering process.Basic parameters:Product models: ADP60M, ADP61M, ADP62M●  Braking force: 3975-7425N

ZYTJ series electric hydraulic rail clamp

Application:The ZYTJ series rail clamp is suitable for windproof and auxiliary windproof in various working and non working states of outdoor track lifting machinery, windproof braking or swing prevention of outdoor crane self-propelled lifting carts, and positioning braking of belt conveyor unloading vehicles.Main features:▲ Spring clamping, hydraulic station drive release;▲ Equipped with a release limit switch for interlock protection;▲ Hydraulic station with manual pump;▲ End face flange connection,;▲ Adopting a dual guide wheel design, effectively preventing the rail clamp from detaching from the steel rail.Working conditions:◆ Environmental temperature: -20 ° C to+50 ° C;Hydraulic station drive power supply: three-phase AC380V 50Hz;Hydraulic station control power supply: AC220V 50Hz or three-phase AC380V 50Hz;◆ Adapt to work schedule: intermittent, short-term action, lower frequency;When there are special requirements, they should be negotiated and determined during the ordering process.Basic parameters:Product models: ZYTJ-120, ZYTJ-250Applicable tracks: P38, P43, P50, QU70, QU80, QU100, QU120Anti slip force: 120-250KN

YLZ, YLBZ series hydraulic wheel edge brake

Application:YLZ, YLBZ series hydraulic wheel brakes are mainly used for windproof and auxiliary windproof braking of outdoor large and medium-sized cranes and port loading and unloading machinery in working and non working states. Wheel edge brakes are generally only used on passive wheels and perform direct braking, effectively preventing the wheel being braked from rolling displacement under wind force. The use of wheel brakes for windproof braking is currently a new and effective windproof measure, which is being widely promoted and applied. If both windproof brakes are used on the high-speed shaft of the driving wheel, the effect will be better and more economical.Compliance with standards:The technical requirements for caliper disc brakes comply with JB/T10917-2008 standard.Main features:▲ Normally closed design, safe and reliable; Disc spring applies force for braking, and the hydraulic station centrally drives and releases it;▲ Set a limit switch for interlocking protection;▲ High performance asbestos free friction pad with high and stable friction coefficient, insensitive to water and salt spray (seawater);▲ Anti corrosion design, all fasteners and pin shafts are made of stainless steel (or QPQ surface treatment), with good anti-corrosion performance;Reasonable sealing structure design and imported sealing components. Good effect and long lifespan.▲ Flexible installation location, easy to use, adjust, and maintain.Working conditions:◆ Environmental temperature: -20 ° C to+50 ° CRelative humidity: ≤ 90%◆ Optional hydraulic station (see hydraulic station sample for details on hydraulic station selection)When there are special requirements, they should be negotiated and determined during the ordering process.Basic parameters:YLZ series hydraulic wheel edge brake model:● Product models: YLZ25- □, YLZ40- □, YLZ63- □, YLZ100- □Applicable wheel diameter: 500-1000mm● Suitable static friction force: 42-150KN● Wheel pressure: ≤ 100TYLBZ series hydraulic wheel edge brake model:● Product models: YLBZ25- □, YLBZ40- □, YLBZ63- □, YLBZ100- □Applicable wheel diameter: 500-1000mm● Suitable static friction force: 42-185KN● Wheel pressure: ≤ 100T

YJGQ series hydraulic rail clamp

Application:The YJGQ series rail clamp is suitable for windproof and auxiliary windproof in various working and non working states of outdoor track lifting machinery, windproof braking or swing prevention of outdoor crane self-propelled lifting carts, and positioning braking of belt conveyor unloading vehicles.Main features:▲ Spring clamping, hydraulic station drive release;▲ Anti corrosion design;▲ Equipped with a release limit switch for interlock protection;▲ Hydraulic station with manual pump;▲ End face flange connection,;The clamp body is a floating structure: horizontal floating distance ± 20mm, vertical floating distance ± 20mm.Working conditions:◆ Environmental temperature: -20 ° C to+50 ° C;Hydraulic station drive power supply: three-phase AC380V 50Hz;Hydraulic station control power supply: AC220V 50Hz;◆ Adapt to work schedule: intermittent, short-term action, lower frequency;When there are special requirements, they should be negotiated and determined during the ordering process.Basic parameters:Product models: YJGQ-16, YJGQ-20, YJGQ-25, YJGQ-31, YJGQ-40, YJGQ-60Applicable tracks: P50, QU70, QU80, QU100, QU120Anti slip force: 80-600KN

YFX, YXZ, YPII electric hydraulic windproof iron wedge brake

Application:The YFX, YXZ, YPII series electric hydraulic windproof iron wedge brakes are mainly used as windproof brakes for gantry cranes, gantry cranes, loading and unloading bridges, and other rail cranes working outdoors in ports, docks, railways, etc., in working conditions and as auxiliary windproof brakes in non working conditions.Main features:▲ Equipped with a release limit switch for interlocking protection;The main swing hinge points are equipped with self-lubricating bearings, which have high transmission efficiency, sensitive and reliable action, and long service life;▲ Equipped with manual release function, easy to maintain;The thruster has a spring reset function to prevent the thruster from being insensitive and the wedge block from resetting in a timely manner after power failure;The thruster has a descent delay function, which adjusts all iron wedges to land on the steel rail simultaneously after power failure;The wedge block is treated with special technology, with high friction coefficient and good anti-corrosion performance.Working conditions:◆ Environmental temperature: -20 ° C to+50 ° C;Relative humidity: ≤ 90%;Power supply voltage: 3-phase, AC380V, 50Hz (please contact our technical personnel for current parameters under other power supply voltages);Work schedule: intermittent (S3-60%. 1200 times/hour) and continuous (S1);When there are special requirements, they should be negotiated and determined during the ordering process.Basic parameters:YFX series electric hydraulic windproof iron wedge model: YFX-350/80,YFX-500/80,YFX-450/80,YFX-55/80,YFX-600/80,YFX-630/80,YFX-700/80,YFX-710/80,YFX-800/80Applicable wheel diameters: 350, 400, 440, 500, 550, 600, 630, 700, 710, 800YXZ series electric hydraulic windproof iron wedge:Product Model: YXZ-250/80、YXZ-350/80、YXZ-400/80、YXZ-440/80、YXZ-500/80、YXZ-550/80、YXZ-600/80、YXZ-630/80、YXZ-700/80、YXZ-710/80、YXZ-800/80Brake wheel diameter (mm): 250, 350, 400, 440, 500, 550, 600, 630, 700, 710, 800YPII series electric hydraulic windproof iron wedge:YPII-460,YPII-500,YPII550,YPII600,YPII630,YPII650,YPII700,YPII710,YPII750,YPII800 Brake wheel diameter (mm): 460500550600630650700710750800

DLZ series electric wheel edge brake

Application:The DLZ series electric wheel edge brake is mainly used for windproof braking of outdoor large and medium-sized cranes and port loading and unloading machinery under working conditions and auxiliary windproof braking under non working conditions. Wheel edge brakes are generally only used on passive wheels and perform direct braking, effectively preventing the wheel being braked from rolling displacement under wind force. The windproof foundation is the same as the YLZ series, with the difference being the use of direct electric drive.Main features:▲ Normally closed design, safe and reliable; Disc spring applies force to brake, electrically opens, electromagnet maintains, automatically closes when power is lost;▲ The drive part has a fully sealed structure, high protection level, long service life, small size, compact structure, and easy installation;▲ Anti corrosion design, all fasteners and pin shafts are made of stainless steel (or QPQ surface treatment), with good anti-corrosion performance;▲ High transmission efficiency, accurate and rapid action;The electric opening method achieves oil-free operation, avoiding phenomena such as brake failure caused by aging of oil pipes, seals, and hydraulic components, and avoiding environmental pollution caused by hydraulic oil leakage;The electromagnet maintains an open state, reducing the energy consumption of the brake being in an open state for a long time;▲ High performance asbestos free friction pad with high and stable friction coefficient, insensitive to water and salt spray (seawater);▲ Equipped with a manual release device, it can achieve separate release of the brake for easy maintenance;Working conditions:◆ Environmental temperature: -20 ° C to+50 ° C;Relative humidity: ≤ 90%;Working voltage: AC380V~AC690V 50Hz/60Hz;◆ Protection level: IP65;◆ Adaptive work system: Continuous work system S1-100%; Intermittent work S3-60%; The working frequency shall not exceed 400 times per hour.Basic parameters:Product models: DLZ25- □, DLZ40- □, DLZ63- □, DLZ100- □Applicable wheel diameter: 500-1000mm● Suitable static friction force: 36-150KN● Wheel pressure: ≤ 100T

YWZ4 (YT1) series electric hydraulic drum brake

Application:The YWZ4 (YT1) series electric hydraulic drum brake is widely used for deceleration and parking (maintenance) braking of various mechanisms in lifting and transportation, belt transportation, port loading and unloading, metallurgy, and construction machinery with explosion-proof requirements.YWZ4 (Ed) series electric hydraulic drum brakes are widely used for deceleration and parking (maintenance) braking of various mechanisms in lifting and transportation, belt transportation, port loading and unloading, metallurgy, and construction machinery with explosion-proof requirements.Compliance with standards:The connection dimensions and braking torque parameters of the YWZ (YT1) series electric hydraulic drum brake comply with the JB/ZQ4388-86 standard, and the technical requirements comply with the JB/T6406-2006 standard.The connection dimensions and braking torque parameters of the YWZ4 (Ed) series electric hydraulic drum brake comply with the JB/ZQ4388-86 standard, and the technical requirements comply with the JB/T6406-2006 standard.Main features:▲ The production is equipped with riveted brake pads, and if replacement of the card type is required, it should be noted;The main swing hinge points are equipped with self-lubricating bearings, which have high transmission efficiency, long service life, and do not require lubrication during use;▲ Adopting YT1 series electric hydraulic thruster thruster;▲ Normally closed design, (power-off) spring brake, (powered on) thruster release.Working conditions:◆ Altitude:<2000m;◆ Environmental temperature: -20 ° C to+40 ° C;Relative humidity: ≤ 90%;Work schedule: intermittent (S3-60%) and continuous (S1);Power supply voltage: three-phase AC, AC380 50Hz (other power levels can be customized as needed);When there are special requirements, they should be negotiated and determined during the ordering process.Basic parameters:● Product model: YWZ4-100、YWZ4-150、YWZ4-200、YWZ4-300、YWZ4-400、YWZ4-500、YWZ4-600、YWZ4-700、YWZ4-800Applicable wheel diameter: 100-800mmBraking torque: 40-12500Nm

YWZ10, YWZ12 series electric hydraulic drum brakes

Application:The YWZ10 and YWZ12 series electric hydraulic drum brakes are widely used for deceleration and parking (maintenance) braking of various mechanisms in lifting and transportation, belt transportation, port loading and unloading, metallurgy, and construction machinery with explosion-proof requirements.Compliance with standards:The connection dimensions and braking torque parameters of the YWZ10 and YWZ12 series electric hydraulic drum brakes comply with the GB6333-86 standard, and the technical requirements comply with the JB/T6406-2006 standard. They are matched with Ed series thrusters that comply with the DIN15430 standard.Main features:▲ Interlocking type equal clearance device and automatic tile positioning device can always maintain equal clearance of both sides of the tile without adjustment, completely avoiding the phenomenon of one side of the brake pad floating against the brake wheel due to uneven clearance;The main swing hinge points are equipped with self-lubricating bearings, which have high transmission efficiency, long service life, and do not require lubrication during use;The brake spring is arranged inside the square tube and equipped with a ruler, allowing users to easily read the braking torque value, eliminating the hassle of measurement and calculation;▲ The brake pad is a card type integral molding structure, which is very convenient and fast to replace. It is equipped with brake pads of different materials such as semi metal (asbestos free) hard and semi hard, soft (asbestos free), etc. for users to choose from;▲ Equipped with Ed series electric hydraulic thruster products, with sensitive action and long service life;▲ Normally closed design, (power-off) spring brake, (powered on) thruster release.▲ Front mounted manual, easier to use and maintain.Working conditions:◆ Altitude:<2000m;◆ Environmental temperature: -20 ° C to+40 ° C;Relative humidity: ≤ 90%;Work schedule: intermittent (S3-60%) and continuous (S1);Power supply voltage: three-phase AC, AC380 50Hz (other power levels can be customized as needed);When there are special requirements, they should be negotiated and determined during the ordering process.Basic parameters:● Product model: YWZ10-200、YWZ10-250、YWZ10-315、YWZ10-400、YWZ10-500、YWZ10-630、YWZ10-710、YWZ10-800Applicable wheel diameter: 200-800mmBraking torque: 80-12500Nm● Product model: YWZ12-200、YWZ12-250、YWZ12-315、YWZ12-400、YWZ12-500、YWZ12-630、YWZ12-710、YWZ12-800Applicable wheel diameter: 200-800mmBraking torque: 80-12500Nm